Hot answers tagged

7

Go here in Central Admin Central Admin > Application Management Site Collections > Specify quota templates Under Edit an existing template choose Personal Site. Change the values under Storage Limit Values to the values you want. You can see the values for a specific users My Site here Central Admin > Application Management Site Collections > Configure ...


6

In general, "My site" is a very poor term. Here are the terms that I typically use: "My Site Host" site collection. This is typically a single site collection that can allow all users to see "About Me" and allow functions such as "People Search". This site collection can exist without a single "Personal site" and without "One Drive For business libraries". ...


6

OneDrive is different with MySites. Unless you were referring to OneDrive for business which is the same with MySites OneDrive for Business uses a platform called SharePoint to give each member of your team a place to store and work on documents with others. Because it uses SharePoint it also provides more administration option for working with documents. ...


4

Normally I would do this through feature stapling, however it doesn't seem to be supported in SPO/O365. There may be some workarounds though. If you are okay with doing it manually, you can create a PowerShell script that looks through your MySites and activates the branding features, and run it regularly. Alternatively you can check other solutions, but ...


4

Yes, but there 2 things you have to make sure User profile sync is enabled, photo property properly mapped n imported. You also need a Mysite host location, this is required because profile picture stored in the User Photos/Profile Pictures If you don't have the Mysite host then thumbnail will not create.


3

No you don't. It is part of the Standard license. It falls below the "Enterprise" tag in "Create new site collection", but it is not part of the Enterprise license. See for example under "Social features" here: https://florianlaumer.wordpress.com/2013/01/15/sharepoint-2013-standard-vs-enterprise-vs-foundation-feature-comparison-matrix/


3

Which fields can be edited by a user is configured at the User Profile Service Application Profile Service Application > Manage User Properties > Select the Property you want to block > Select the Option


2

A user profile is a collection of properties that describes a single user, along with the policies and other settings associated with each property. The user that a profile describes is represented by a unique identifier in the profile, and the remaining properties provide information about that user, such as the user's phone numbers, manager, office number, ...


2

2 things, Choggo already mentioned in his response that if their are certain properties then edit that proptery and select Do not Allow... 2nd method you just applied, You need to read this "If Create Personal Site is checked, users may edit their profile regardless if the Follow People and Edit Profile is checked. So the only way you can turn this ...


2

On premises? If so, you could deploy a delegate control with ControlID of "SuiteLinksDelegate"


2

that is really tough question to answer. You have to check the ULS logs and Event Viewer during the time when it stuck. I would do following things( i hate AutospInstaller) Delete the User Profile service check the Certs store on server, make sure no SharePoint/FIm certs over their, if any delete them.check this check the central admin > monitoring and ...


2

Error messages in SharePoint usually come with Corelation ID. Use it to find relevant entries in ULS logs. By default you can find SharePoint logs in 15 hive, under: C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS You can use Merge-SPLogFile PowerShell cmdlet to gather logs from all servers and ULS Viewer to open log files.


2

I can suggest you two blogs which I just read because I was planning to do the same as you are. What is feature stapling and how to achieve it here. How to create a list with data whenever a site is created here. Apart from that feature stapling is quite powerful, whatever can be done through feature object model, i.e. feature activation, deactivation can ...


2

Yes,It is Possible.But you have configure User Profile Service Application in Central Admin.Please refer following link. Create User Control to display User Profile Picture in SharePoint 2013 Site


2

MySites are using the UserProfile Service. You can't use MySites without UPS, however you can use the UPS without configuring MySites. For further information the answer to this question pretty much says everything: What happens if I don't configure mysites?


2

Make sure the following: You are using the Farm Account to start UPSs. The Farm account is added to local administrator group during starting UPS service. Adding the service account running User Profile Sync Service to local administrator group on the server running Distributed Cache. AppFabricCachingService in services is running via Farm account. Note: ...


2

"About Me" is held within the UPSA Profile database. If your CDB contains the MySite Host there will be a User Photos library at the root of the site where you can grab the pictures from.


1

Before you begin Before you enable managed navigation, make sure that: You enable the SharePoint Server Publishing Infrastructure feature on the site collection level. See Enable publishing features. You create a term set to specify your site navigation. See Set up a new term set and Create and manage terms in a term set. You’re a member of the Owners ...


1

You can change the layouts or master page for the mystite using SharePoint designer or if you want to maintain the changes on Source Control, you can copy the existing page, edit it in any text editor then upload it again to the master page gallery


1

You can setup the User profile without MySites, but still you need mysite host. MySites are the User's personal Site collection where they can store documents, create list etc. MySite Host is the Root Level Site collection with MySite Host Template. You need mysite host in order to User profile work properly. MYsite Host required for User profile pictures,...


1

If I understand the question correctly, then you need to follow these steps: Go to Central Administration Click on Manage service applications -> Select User Profile Service Click on Manage User Properties Add a new Property and map it with AD field or edit an existing property. Make sure you tick "Show in the profile properties section of the user's ...


1

Try Patching your SharePoint servers. I am working on a project for a customer now and after we patched all of our SharePoint Servers to SP1 and November 2015 CU the service now starts without any issues. You can find your servers patch level by going to: yourcentraladminaddress/_admin/PatchStatus.aspx Macth your SharePoint Servers build numbers on this ...


1

I am not sure you can do it with Mysite, You can enable it using the hacking the url. Enable the BlobCache on Mysite then go this url "www.mysite.com/_layouts/15/ImageRenditionSettings.aspx" and create item here. But i am not sure will it work, But another thing Bydefault Profile picture having three sizes when people upload the picture. Read more here: ...


1

Its advisable to create a custom Page Layout based on your requirement. Then create a Welcome Page out of that. Once completed, you can create a PowerShell Script which goes and create this Page for existing My Sites. And also change the Welcome Page to the newly created page.


1

You should create a Term Set and select that Term Set in the "Pick a Term Set for this property" dropdown. Users are only allowed to pick terms from the term set you've set in the "Pick a Term Set for this property" dropdown. This term set could/should contain work related items e.g. "Excel", "Math", "Biology", "History" etc. Working with managed metadat: ...


1

For MySite. You have to make changes two places. Update the MySite Host in the User Profile Services Settings. Update AAM for the MYSite.


1

Since you can view MySite using PageViewer web part, I'm assuming it's within same domain. <script type="text/javascript"> $(document).ready(function(){ var mySiteIframe = $("#MSOPageViewerWebPart_WebPartWPQ2"); mySiteIframe.load(function(){ window.console && console.log('Loading Iframe'); mySiteIframe.contents().find(...


1

Sounds like time to test it out in a virtual environment. I cannot answer for you as I have not done this, BUT, you should be able to do this. Create a Second User Profile Service Application If you are not going to share user Metadata, you either need to try to change the metadata bindings on the default User Properties or create a second Managed Metadata ...


1

If you add http://team.company.local to your alternate access mappings, SP will probably replace it with the correct http://team url for you. If that doesn't work, I would setup IIS and DNS to support both urls temporarly until you can get items to stop following. If neither of those are acceptable, you should be able to use powershell or a console app ...


1

If your site has jQuery a simple solution without changing your setup would be: $('div#ProfileViewer_ValueEmail').remove(); You can add this to person.aspx on page load.


Only top voted, non community-wiki answers of a minimum length are eligible