1

I want to display outlook email to SharePoint page.

I have tried to display outlook email to Page viewer web-part but getting error

enter image description here

is there any way to achieve it. please help me out

Updated : I have followed below link https://support.office.com/en-us/article/Working-with-Outlook-Web-Access-Web-Parts-24589931-15ac-4703-92c9-519a11542404?ui=en-US&rs=en-US&ad=US

In this site it is given that

Under Page Viewer on the tool pane, make sure Web Page is selected. In the Link field, type the URL for the Outlook Web App. Note that the Outlook URL must include the parameter exsvurl=1. For example, the Outlook URL typically resembles the following: https://www.outlook.com/owa/?exsvurl=1&cmd=contents&part=1&fpath=inbox&realm=contoso.onmicrosoft.com , where the SharePoint Online realm “contoso.onmicrosoft.com” represents the URL you used when you signed up for your Office 365 subscription.

so i have given below url

https://outlook.office.com/owa/#exsvurl=1&cmd=contents&part=1&fpath=inbox&realm=outlook.office.com

but still i get the same error "There is a problem connecting securely to this website"

1
  • Can you add the site to trusted site and check ? May 11, 2017 at 9:10

3 Answers 3

3

Follow Below Steps to Add an Outlook Web Access Web Part to a page

  1. From a page, in the ribbon, click the Page tab, and then click the Edit Page command.

  2. Click on the page where you want to add a Web Part, click the Insert tab, and then click Web Part.

  3. Under Categories, click Outlook Web App.

  4. Under Web Parts, select the Outlook Web Access Web Part that you want to add to the page, and then click Add.

  5. On the page, point to the Web Part, click the down arrow, and then click Edit Web Part.

  6. In the Mail Configuration section of the tool pane, type the URL for your Outlook Web Access server in the Mail server address box. For example, https://mail.contoso.com

  7. In Mailbox, type your email address, such as [email protected].

  8. Configure the other options for the Web Part as you prefer.

  9. Click OK to save your settings and exit the tool pane, or click Apply to see your changes without closing the tool pane..

  10. When you have finished editing the page, click the Page tab, and then click Stop Editing.

Else

Please try below mentioned link.

Outlook Web App in SharePoint Online

6
  • I can not see any Outlook Web App under Category while adding webpart. is there any setting require to enable Outlook web app? May 9, 2017 at 8:03
  • I think your approach is for SharePoint onperm. I am looking in to Office 365. May 9, 2017 at 8:11
  • Kindly check the URL provided in the answer
    – Hardik
    May 9, 2017 at 9:04
  • Same link i have tried using page viewer, but on getting error "There is a problem connecting securely yo this website" May 9, 2017 at 10:23
  • Are you trying with https or http?
    – Hardik
    May 9, 2017 at 11:14
2

It will help you :

1-From a page, in the ribbon, click the Page tab, and then click the Edit Page command.

NOTE: If the Edit Page command is disabled, you may not have the permissions to edit the page. Contact your administrator.

2-Click on the page where you want to add a Web Part, click the Insert tab, and then click More Web Parts.

3-Under All Categories, click Media and Content.

4-Click the Page Viewer Web Part, and then click Add.

5-On the page, point to the Page Viewer Web Part, click the down arrow, and then click Edit Web Part.

6-Under Page Viewer on the tool pane, make sure Web Page is selected. In the Link field, type the URL for the Outlook Web App. Note that the Outlook URL must include the parameter exsvurl=1. For example, the Outlook URL typically resembles the following: https://www.outlook.com/owa/?exsvurl=1&cmd=contents&part=1&fpath=inbox&realm=contoso.onmicrosoft.com , where the SharePoint Online realm “contoso.onmicrosoft.com” represents the URL you used when you signed up for your Office 365 subscription. For more details on defining the Outlook URL to enter in the Link field, see “Using Outlook Web App Web Parts” below.

7-You may want to adjust the height of the Web Part in the tool pane until it shows as much of the Outlook Web Access interface as you want. To do this, click Appearance under Should the Web Part have a fixed height?, click Yes, and then type the number of pixels, such as 500.

8-Click OK to save your settings and exit the tool pane, or click Apply to see your changes without closing the tool pane.

9-When you have finished editing the page, click the Page tab, and then click Save & Close.

For additional tips on defining an Outlook URL, such as parameters you can add to show specific pages or views, see Using Outlook Web App Web Parts on Microsoft TechNet.

Look at this link: https://support.office.com/en-us/article/Working-with-Outlook-Web-Access-Web-Parts-24589931-15ac-4703-92c9-519a11542404

1
  • Please check updated question i have followed the same link but no luck. May 9, 2017 at 8:20
0

Please correct your realm-link this is supposed to be your tenant-name like abcconsulting.onmicrosoft.com.

And use URL for Page viewer like given below:

https://outlook.office.com/owa/#exsvurl=1&cmd=contents&part=1&fpath=inbox&realm=<tenantid>.onmicrosoft.com

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.