Tag Info

Hot answers tagged

6

I've had a similar problem; SharePoint/InfoPath doesn’t seem to deal with multiple-selection list boxes very well (unless I'm also missing something). The workaround I used w/o code was to create a new hidden field with the default value set to: eval(eval(MultiSelectField[. != ""], 'concat(., ", ")'), "..") where MultiSelectField is your field Tick ...


4

You need to tell InfoPath that changes to the field should result in a server round trip. Select the source control. In the ribbon tab Control Tools Properties click Control properties On the Browser Form tab select Always below Postback settings


3

The only time I've seen this happen I've had duplicate documents (usually with duplicate Document IDs). This was either caused by Actually having duplicate document IDs, seemingly caused by some defect in SharePoint Search not crawling the documents properly This may not be the cause of your issue, especially if you only have a single result, but have a ...


3

Firstly, we need to know whats happening behind the scenes with Admin approved forms while uploading and activating within the Central Admin. Behind the simple click of the Upload button, InfoPath Forms Services creates a feature to deliver the form template (.xsn file). The feature is then wrapped in a Windows SharePoint Services solutions package which ...


3

Here we go : http://blogs.msdn.com/b/infopath/archive/2010/06/03/how-to-pass-querystring-data-into-an-infopath-form.aspx


3

Can be done with an automatically triggered Workflow, w/o any coding. Just create a WF with SharePoint Designer.


2

Its going to depend on what functionality you used in your form. If you used components that are new to InfoPath 2010, such as the Contact Selector, you aren't going to be able to publish it in a MOSS 2007 environment. John


2

It's been a few projects since I've done Infopath, but are we talking about connections stored externally to the form? These are stored in a .udcx file in a Data Connection Library. If so, why isn't it as simple as just editing the .udcx file? If not, why store embed the connection in the form rather than use .udcx files? Or am I missing something ...


2

Yes as far I'm aware that's the only way. You need to save the source files out in InfoPath client, edit the manifest file with the correct URLs, then save and publish back into SharePoint. I haven't come across any community tools that make this process easier but you would think there's a good need for them. You may want to search around for that.


2

The "answer" to this turns out to be the Lists.GetListContentTypes Method operation. With it, you can get back the customized forms per Content Type. I've added this operation into v0.4.8 of my jQuery Library for SharePoint Web Services so that I can use it in the SPScriptAudit function. M.


2

Sorry. I'm afraid you have to one-at-a-time it in the publishing wizard.


2

Require the item be checked out for editing in the versioning settings.


2

I ran into something similar. The problem is that the InfoPath Form Template is under the element's sub-folder. You need to put the .xsn file in the same folder as Feature.xml. I could not find a way to do this using the SharePoint Project template in Visual Studio 2010. So I used a WSPBuilder project instead.


2

Here are answers: Yes. Take a look at InfoPath 2010 Introduction Part 3: SharePoint Form Web Part No. It is not logical. Maybe you can just hide your list from users (navigation) as simplest woraround. Yes. Take a look at InfoPath 2010 – turn off Ribbon and then you need to add Submit connection and button for submit action.


2

You can create simple workflow using SharePoint Designer. Your InfoPath form should contain field Manager and you should propagate it to SP when you commit your form. Your workflow can then read this value and use it to sen email to manager. You can use OOTB Modified by (Editor) column to determine person who submitted the form. Your workflow can be ...


2

You could use an InfoPath form for entry instead. InfoPath lets you set rules and such so that when you fill in one value, it populates another based on a formula or value.


2

Open the InfoPath Form in Design view. 1) Go to Tools -> Form Options. 2) Select Category 'Open and Save'. 3) There is a section called 'Open behavior', where you can set Rules. These Rules are fired when the Form is opened. This is similar to Rules specified in "Form Load" option in InfoPath 2010.


2

You would add a calculated value to accomplish this. Do not add your Created By field to the form template. Add a Calculated Value from the Controls. Go into the control Select Insert field or Group You wont see Created By at first, select show advanced view Expand dataFields Expand Created By Expand pc:Person Select DisplayName Click Ok That should do ...


2

After spending much of today on the phone with Microsoft developer support, it turns out that this is a legitimate bug. It was fixed by the August 2011 cumulative update for SharePoint Server. Once I installed that successfully, the above error no longer occurred.


2

well, state service just use SQL DB to store user session data so Guids are most probably refers to current User session. Lock on a SQL table can appeared after too many requests at the same time. Probably your State Service is a performance bottleneck for a bigger farm? Could you please enable SQL profiling on State DB and check its performance and locks? ...


2

It seems Microsoft is not accepting feedback for SharePoint Server 2010. But, if you have MSDN subscription you can open the Support Case and report bugs to Microsoft. Depending on type of subscription, you get number of support cases you can open.


2

Each InfoPath form type has a different purpose and different restrictions related to that purpose. There are (in general) three types of forms List Form Web Form Filler Form First I will talk about what the restrictions are for each, and then how to use them List Form: A list form is a SharePoint specific form meant exclusively for use to replace the ...


2

I had a similar issue with "You are not authorized to perform the current operation" when publishing to a HTTPS destination. The form template was set to Full Trust (Central Admin Administrator Approved). However InfoPath wants to "see" that URL and confirm it's a valid destination. I opened the HTTPS website in IE. By clicking "View Certificate" then ...


2

A bit late, but since the other answer was not terribly helpful, you can reference other classes and code in a separate strong-named assembly and include a reference to it in your project. The form's assembly may be fairly rigid, but you can always design around it. Build your other functions/classes in a separate VS project, deploy it as a SP solution, and ...


2

It is impossible to publish "Sharepoint List Form" compatibility/type Infopath template to more than one list You can "centralize" and automatize (make a script at Windows level to a manual procedure I gave below) to restricting changes just to one template (in Infopath Designer 2010), and after making changes in one, to "replicate" the template's ...


2

While deploying your feature you need to change the scope of your feature(feature.xml) as web. So when you activate the feature it will be activated for that subsite only. Scope="web" more can be found here: http://weblogs.asp.net/soever/archive/2007/05/03/sharepoint-features-elements-scope-and-other-info.aspx


2

I know there is Form Library Settings > Advanced Settings > Open Documents in the Browser > Open in the browser as the default behavior. But this does not affect my form There are 2 places for configuring this. One is that you mentioned and another is in InfoPath Forms Services setting (using the Farm Administrators Sharepoint Group user): ...


2

Do you have root site for your site collection? It your site collection has only sub site then you need to create root site also to open sub site in InfoPath 2010.



Only top voted, non community-wiki answers of a minimum length are eligible