Questions tagged [alternate-access-mapping]
AAM tells SharePoint how to map web requests to the correct web application and site so that SharePoint can serve the correct content back to you.
248
questions
2
votes
2
answers
2k
views
View All Site Content Link goes to Content of Incorrect Site
Can you explain why a View All Site Content link would go to the wrong place? I've never seen this before, but a friend reports it happening on a test farm. What could explain most everything else ...
- 3,589
2
votes
1
answer
61
views
Blocking Access to Specific Sites For Certain Alternate Access Mappings
Ok, so I'm not sure that this is entirely possible, but wanted to pose the question: would it be possible to block access to certain content when the site is accessed from a certain alternate access ...
- 11.9k
2
votes
1
answer
859
views
Calendar Overlay issue in SharePoint 2010
I have a secured webapplication means that it uses "https" protocal, in which I have created two calendars Cal_1 and Cal_2. While trying to use the Calendar overlay option, it does not accept the "...
- 2,548
2
votes
1
answer
315
views
How do I get the matching URL from another AAM web application based on the current request?
I'm trying to to create a link on one web application to another web application using C#.
Code is running on:
http://portal
I want to create a link to http://my.
The farm is also available on a ...
- 1,852
2
votes
0
answers
91
views
Redirect to my custom page which contain a content search web part is NOT working when i access the sites using the URL defined as intranet zone
I am facing this problem inside my sharepoint 2013 on-premises farms. where i have added a content search web part, then i did the following:-
1- Inside the content search web part's display template,...
2
votes
0
answers
31
views
AAM original site will not loaded
I have started a SharePoint 2013 site, I only have the Central Administration and the site named after the server (we will call this one spSrvr). I wanted people to be able to use the company name ...
- 63
2
votes
1
answer
3k
views
I'm unable to access SharePoint Server through unc
We're running a SharePoint Server 2010 in windows 2008 server. Earlier we use to map SharePoint site to a drive and access the files. For the past few days we're unable to map the drive or access ...
2
votes
0
answers
105
views
Sharepoint 2010 http webapp redirected to wrong webapp when using https
I am facing a specific probelm on a Server2008R2 & Sharepoint 2010 setup.
On the System there are multiple Webapps, but only one must be configured with SSL on port 443. the others remain on port ...
- 21
2
votes
1
answer
520
views
Accessing SharePoint documents from different WebApplication Zones
I have a SharePoint 2010 Server site (http://shpserver:81) that I have extended twice:
Intranet: http://partnernet.abc.local
Internet: https://partnernet.abc.com
When I am on the internet (https://...
1
vote
3
answers
8k
views
Using Sharepoint URL without port number
I have a sharepoint web application like so:http://intranet:8080
I don't want to use port 80.
But i want users to type URL http://intranet instead of http://intranet:8080
How can i achieve this?
...
- 4,272
1
vote
3
answers
64
views
Alternative access mapping in SharePoint
How make SharePoint root site collection subsites to redirect to https if user write http on the browser
the scenario as following:
After configure alternative access mapping from SharePoint and IIS:
-...
1
vote
2
answers
212
views
Can I switch SharePoint to https and do not enforce TLS 1.2?
I am currently using http and I have not enabled TLS 1.2. Can I switch all web applications to https through IIS and AAM and leave the registry settings without any change (not enforcing TLS 1.2)? Is ...
- 295
1
vote
3
answers
2k
views
Does a extended web app/zone with an AAM fully mirror the original web app/zone?
(I'm new to zones and AAMs so apologies if this question comes across a bit incoherent... I haven't really grasped how it all works yet.)
I have a Publishing site in SharePoint, running in a web app ...
- 1,023
1
vote
1
answer
3k
views
unable to access my sharepoint sites collection using server IP address
I am working on a SharePoint Server 2013 inside Windows Server 2008 R2.
Now some users, due to DNS limitations and network access, can not access our SharePoint sites using the server name such as ...
1
vote
1
answer
1k
views
AAM redirect http https double auth
I use SP2013, and I set AAM to redirect http to https.
When I browse http://mysite it asks for credentials, then redirect to https://mysite and asks for credentials again.
So the redirection works ...
- 1,022
1
vote
1
answer
2k
views
Extend SharePoint 2010 web application to use https(SSL)
I have a SharePoint 2010 web application which uses Claims based authentication with NTLM and the site is published to TMG. After completing this process a few days later we installed SSL certificates ...
- 1,206
1
vote
3
answers
2k
views
Sharepoint 2010 is changing my url in hyperlink column
I have a SharePoint 2010 web application "myapp.test.com" and I have extended this application to myapp-edit.test.com
I also have configured the following two alternative access mapping urls:
myapp....
- 85
1
vote
2
answers
12k
views
Outlook/SharePoint calendar sync 'error occurred connecting to site'
Our SharePoint site was originally setup under a test name (oldname). When brought into production, I added an AAM to extend it to our production name (prodname). About 6 months ago, I added an SSL ...
- 219
1
vote
2
answers
1k
views
SSL redirect and AAM not working on a Workflow which is using the original/install URL
A year ago, I created our SharePoint site under a test name. I then added an AAM to extend it to our production name. Just a month ago, I added an SSL redirect in IIS which sends all http requests ...
- 219
1
vote
4
answers
4k
views
MySite Outside Access
I want to allow an https access to a MySite from outside. I have already do this for the intranet and it works but for the MySite it's another problem. I have change mapping access with my https URL ...
- 281
1
vote
1
answer
2k
views
SharePoints on VMWare Workstation. Need to access the SP from non-domain desktop
I installed VM-Workstation and added 2 VM (1 vm for AD domain controller and 2nd VM for play SP 2010)
I dont want my home desktop to be part of the domain that I created for play sp2010
I can access ...
- 135
1
vote
1
answer
692
views
DNS and Http HOST header issue
I am using SharePoint Server 2007 Enterprise with Windows Server 2008 Enterprise. And I am using publishing portal template. I have a physical server with a single IP address, and I have set in DNS to ...
- 1,343
1
vote
3
answers
5k
views
Configuring sub-site URL on its own domain
I am using SharePoint Server 2007 Enterprise with Windows Server 2008 Enterprise. I am using publishing portal. And currently suppose my root site domain name is www.abc.com, and there is a sub-site ...
- 1,343
1
vote
2
answers
178
views
Hosting two SSL sites (different host name) on same server with different certificates and without ports (i.e. 443)
We have a SharePoint site https://example.com hosted on port 443.
There is another site https://anotherexample.com that should be hosted on same server and without port (i.e. 443).
Both the ...
- 985
1
vote
1
answer
327
views
Necessary to add a DNS entry for a internal URL in AAM?
Can I add an internal URL for a web application without any DNS or HOST entry?
I know it is required for a public URL in case of extending.
- 31
1
vote
1
answer
175
views
Alternate Access Mapping - Intranet
I need to give a Intranet URL for the company folks to access the Central Admin
. I have created a public URL under Alternate Access Mapping.
My central admin url is somethinlike http://shaamil_vm:...
- 708
1
vote
1
answer
773
views
SharePoint site accessed via AAM url causes 401 Unauthorized error
I have a internet mapping for a SharePoint site that works fine. However, the same site's WCF REST service causes a '401 Unauthorized' error when accessed via a coded functionality.
The same code ...
- 1,157
1
vote
1
answer
1k
views
Programmatically get port 80 Web Application Default URL for Farm?
How would I programmatically get the port 80 Web Application Default URL for the Farm?
- 1,020
1
vote
1
answer
1k
views
Sharepoint Redirects if not specifying /pages/default.aspx
Hope someone can help.
I have a Sharepoint web app which I've given a new URL (Host header). Now, whenever I browse to http://newurl, it does a redirect to http://oldurl and then to http://newurl/...
- 2,676
1
vote
2
answers
1k
views
I lost Central Admin url Sharepoint 2016, Please Help!
I have a problem access Central Admin after I edit alternate access mapping.
I used the URL name "http://name/" without :port, and now it won't open.
When I open using SP 2016 Central admin ...
- 33
1
vote
1
answer
170
views
Changing webapplication host header
Can I change my host header for my webapplication simply by adding a new binding in IIS, and changing the AAM for the default zone to the new URL?
According to this link I have to do more than that.
...
- 478
1
vote
1
answer
15
views
Can i Extract and Re-deploy all custom solutions when i change the Default Zone URL in AAM
I have plan to change the default zone URL for a SharePoint web application , and there are some farm solutions also deployed if I change the default zone URL
can I Extract and Re-deploy all custom ...
- 2,965
1
vote
2
answers
675
views
How to setup sharepoint on port 8080 (http)
My current setup is that i have sharepoint sitting on the port 80 and 443 with portal.company.com, and i would like to extend the application to use the 8080 port additionally, but on the different ...
- 145
1
vote
2
answers
1k
views
SharePoint 2010 to 2013 - How to keep the same URL during migration
I am working on building new 2013 farm. How do I handle URL because in DNS it can only be routed to one server? Any good article or steps on this can help me a lot.
Thank you very much in advance.
- 11
1
vote
2
answers
1k
views
Redirecting of SharePoint Default Home page
In my production server when I am hitting the url ".../sites/en/Pages" I get an 401 error access denied error. Though I have all the permission in Pages library. Now in my staging server which is ...
- 1,768
1
vote
1
answer
340
views
how can i change the sharepoint web application name and it also apply in IIS?
In SharePoint 2010, when I create new web applications I gave the name of SharePoint web applications like sharepoint-81,sharepoint-82... and after application created, in IIS also name of the ...
- 2,965
1
vote
1
answer
506
views
Sharepoint 2013 Alternate Access Mapping and HTTP Redirect
We are having trouble getting Alternate Access Mapping / HTTP Redirecting to work.
Our SP url is something like this http: //SPServer /sites/intranet
we are trying to enable users to access it ...
1
vote
1
answer
182
views
Configure site to support the URL reference with and without the "www"
I have created multiple HNSC under a unique Web Application as follows:
http://site1.com, http://site2.com, http://site3.com.
I would like to be able to access any of these site collections using ...
- 447
1
vote
1
answer
102
views
Explain like I'm 5. Alternate access Mapping problem
Assume http: has 2 forward slashes
I have a web application: http:/spintranet.domain.something-xxx.org (This is the host name, this is what is typed into the url)
I have a dns record for http:/...
1
vote
1
answer
123
views
Impact of not updating default AAM when changing from http to https
Usually when you first setup the SharePoint web app you do not have the SSL certificate. So, you setup the SharePoint web app using http:/foo.com
Later on you get the SSL, and update the bindings in ...
- 236
1
vote
1
answer
143
views
Alternate Access Mapping URL requires login
I have a problem with an Alternate Access Mapping URL.
When I access my site collection through:
http://myserver:8005
it works fine (user is automatically recognized).
But when I access it through ...
- 1,183
1
vote
1
answer
2k
views
Creating new web application using WFE server
I have deployed a SharePoint 2013 server farm with a web server (WFE1), an application server (WApp1) and a sql server. At first, WFE1 and WApp1 worked as application server and as web server, but i ...
- 11
1
vote
2
answers
519
views
Alternative Mappings and Uploading Files
I currently have code in place which uploads files to a sites Shared Documents folder on my development machine - i.e. http: // mydesktop/mysubsite1. My machine (mydesktop) has a single site ...
- 183
1
vote
1
answer
49
views
Are there any risks when allowing only HTTPS traffic to a SP site?
We'd like to do away with any pesky additional AAMs, and also not have to worry about extending our web applications more than we need to - our implementation is very straightforward, and having extra ...
- 371
1
vote
1
answer
57
views
Can I change the Default Alernate Access Mapping to include the domain?
We have two domains joined through a trust and when people access the SharePoint site in Domain A from Domain B they have to add .xyz.local to all SharePoint addresses.
For general usage this is fine ...
- 91
1
vote
1
answer
481
views
Sharepoint 2010 alternate access mappings and HttpModule problem
I have encountered an interesting problem recently.
I have a HttpModule, which i have added in
modules runAllManagedModulesForAllRequests="true" node , by hand.
The main site collection is at http: ...
- 41
1
vote
1
answer
436
views
Alternate access mappings and using SPWeb, SpSite objects
We have more or less the following infrastructure
1. In production we have WFE, App Serv, UAG. We have some configuration to point internet URLs to sites on THE dmz production farm. Something like ...
- 5,201
1
vote
1
answer
2k
views
IIS Site Binding without SP Alternate Access Mapping
I have SharePoint Server 2010, and WebApp with site collection http://aa.contoso.com
when i add IIS Site Binding http://bb.contoso.com and HH in DNS but Without adding Alternate Access Mapping and the ...
1
vote
1
answer
342
views
Configuring Alternate Access mappings
So this is the situation,
I have a SharePoint farm with multiple servers.
I have multiple web applications.
I have two WFE servers.
The incoming traffic is load balanced using an ISA server ( ...
- 705
1
vote
1
answer
137
views
SP2010 - Image links are pointing local URLS
Migrated a site from MOSS2007, and was given a new site URL of http://:/
e.g. http://spserver:1234
I have added an alternate access mapping so it can be accessed over the internet. However none of ...
- 121